30 Amp Charge Controller with twin 5M 4mm2 Cable with Mc4 Plugs

(PLEASE NOTE A CUSTOMER HAS REPORTED AN ISSUE WITH THE USB OVERPOWERING UP TO 10V. ITS BEST TO TEST THE OUTPUT FIRST BEFORE USING OR AVOID USING THE USB SOCKETS ALL TOGETHER)

Please note this charge controller is compatible with all our small panels up to 200watt connected to one 12v battery.

All our panels above 200watt are compatible with this charge controller as long as connected to x2 12v battery (24v).

———————————-

12V/24V auto adapt,LCD display,USB Charge

Automatically manages the working of solar panels and batteries in your solar system.

Overloading & short-circuit protection. Reverse discharging & reverse-polarity protection.

Under-voltage and over-charging protection. Protection from lightning strikes.

Prolong the battery life cycle, and keep the load working well.

This controller can charge and discharge at the same time. It has a perfect SOC function,control charge current, and supply power to the loads.

The controller will automatically compensate the temperature of the charging voltage according to the changes of ambient temperature.

Specifications

• Battery Voltage: 12V/24V auto adapt

• Current:30A

• Max Solar input:<50V

• Charge drop:<0.2v

• Discharge drop:<0.25v

• Equalization: 14.4v/12v system,28.8v/24v system

• Acceptance:14.2v PWM/12v system,28.4v PWM/24v system

• Float:13.7v(adjustable)/12v system,27.4v(adjustable)/24v system

• Charge reconnect:12.6v(adjustable)/12v system,25.2v(adjustable)/24v system

• Discharge stop:10.7v(adjustable)/12v system,21.4v(adjustable)/24v system

• Discharge reconnect:12.6v/12v system,25.2v/24v system

• Self-consume Load 8 amp Max On/Off Load is for small amp light etc.

• Heavy load items fridges etc, std method connect direct to the battery on all regulators.

• USB output: 5V/2A max

• Operating temperature:-35 degree -- +60 degree

• Size/Weight:150*78*35mm/150g

• #1 Year Warranty

  ——————————-

Safety Instructions:

Make sure your battery has enough voltage for the controller to recognize the battery type before first installation.

The battery cable should be as short as possible to minimize loss.

The regulator is only suitable for lead acid batteries: OPEN,AGM, GEL

It is not suited for nickel metal hydride, lithium ions or other batteries.

The charge regulator is only suitable for regulating solar panels.

ALWAYS FIRST Connect the battery to the charge regulator - plus and minus.

SECONDLY Connect the solar panel to the regulator - plus and minus.

Correct wiring method for heavy amp accessories, is to connect them direct to your battery

Package Includes

• 1 X 30amp Solar Charge Controller

• 1 X User Manual

• 2 X 5M 4mm2 Cable with Male and Female Mc4 connecters